Click here for Router Setup

Nighthawk Router Setup via app

  1. Download the Nighthawk app.

  2. Attach the provided antennas (if any) and connect your modem to the Internet port on your router.

  3. Power on your router.

  4. Wait for the WiFi LED to light.

  5. Look on the router label for your router’s WiFi network name (SSID) and network key (password).The label is on the back or bottom of your router.

  6. On your iOS or Android mobile device, tap Settings > Wi-Fi.

  7. Connect your mobile device to the network that is listed on your router’s label and enter the password.

  8. Launch the NETGEAR Nighthawk app on your mobile device.

  9.  Follow the instructions in the Nighthawk app to install your router and connect to the Internet.
app

Why Router is not connecting to the internet

Router

  • Many problems can cause Netgear router problems and there is no accurate solution unless you first know the cause behind the problem. here are some of the possible issues

  • Please make sure the cable connection from the modem to the Netgear router is not loose or faulty.
  • the Netgear router firmware is outdated
  • Internet is down from the internet provider side
  • the settings or firewall has blocked the internet connection
  • router overheating or technical glitches

How to Power Cycle Router And Modem

Doing a Proper Restart Or Power Cycle of your Router and modem is Essential. Restart Your Modem First Wait for One minute And then Restart Your Router.

  • Now Restart Your computer and all other devices at your home Like phone, kindle, tablet, etc.
  • Check Your Modem and router Light. See if your internet light is on and working.
  • Try connecting to the internet using your Computer. if the Netgear router orange light is blinking then it’s time to try different ways of troubleshooting
netgear new extender

How to change Netgear Router password

password
  1. Launch an Internet browser and type Router login into the address bar.
  2. Enter the router user name and password when prompted.
    The default user name is admin. The default password is password.
  3. Click OK. The BASIC Home page displays.
  4. Select Wireless.
  5. Enter your new user name in the Name (SSID) field.
  6. Enter your new password in the Password (Network Key) fields.
  7. Click the Apply button. Your changes are saved.